rocker arm造句

1、Photo 1 shows the rocker arms with the rocker arm pins and ball bearings installed.
图片1显示了摇杆武器与摇臂引脚和球轴承安装。

2、The finished rocker arm brackets.
成品摇臂括号。

3、Some castings, such as crankshaft, rocker arm et al were produced.
已浇注了曲轴、摇臂等铸件。

4、The downward-moving side of the rocker arm pushes on the valve stem to open the valve.
摇臂向下移动的那一边推动气门杆以打开气门。

5、The rocker arm pivots on a shaft through its center
摇臂以通过它的中心为轴而旋转。

6、The "EPG" and "ETG" parallel gripper lines utilize a double acting piston and rocker arm design.
在“电子节目指南”（两个下巴）和“ETG的”（三下巴）爪平行线利用了双动活塞和摇臂的设计。

7、Development of Aluminum Rocker Arm of Automobile Engine
汽车发动机铝合金摇臂的研制

8、The push rod, as it is lifted, causes the end of the rocker arm to move up.
当推杆升起时，摇臂的端部向上移动。

9、This setup shows the radius on the end of the rocker arm brackets being cut using the rotary table.
这表明，半径设置的结束摇臂括号被削减使用转盘。

10、One of the heads with rocker arm brackets and spark plugs installed.
其中一名负责人与摇臂括号和火花塞安装。

11、Remove rocker arm cover and ventilator hose (A)
卸开摇臂杆盖和通风管（A）。

12、Rocker arm, Rocker arm shaft, Rocker assembly, Valve guide tube, Camshaft bearing Cap.
气门摇臂，摇臂轴，摇臂总成，气门导管，凸轮轴盖。

13、Common defects during the rocker arm production were analyzed and some measurement was suggested.
同时，分析了摇臂铸件在生产过程中常见的缺陷，并提出了改进措施。

14、The rocker arm on the jacket launch barge is a transition installation equipped at the stern.
导管架下水驳船摇臂是安装在船艉的用于导管架滑移下水的过渡装置。

15、Study and Manufacture of PM Inserted Rocker Arm for JQ Engine
JQ型无铅汽油发动机粉末冶金摇臂镶块的研制

rocker arm翻译