crankshaft造句

1、Remove the crankshaft oil slinger.
拆去曲轴抛油环。

2、The power mechanism of the engine is actually called the crankshaft and connecting rod mechanism.
发动机的动力机构实际上就是曲柄连杆机构。

3、Camshaft from the crankshaft through the timing belt or gear or chain drive.
凸轮轴由曲轴通过齿形带或齿轮或链条驱动。

4、The lower end of the connecting rod fits the crankshaft journal.
在连杆大头安装曲柄轴颈。

5、A "Tent-Dam" Model to Predict Fatigue Reliability of Crankshaft of ICE
用“帐篷—堤坝”模型预测内燃机曲轴的疲劳可靠性

6、Forging Technology Design of Series 350 Crankshaft of Chevroler
雪佛莱350系列曲轴锻造工艺设计研究

7、The crankshaft has three main bearing journals.
曲轴有三个主要轴承期刊。

8、Remove the crankshaft from the cylinder block.
从汽缸体上卸去曲轴（参看“汽缸体-拆卸”）。

9、Crankshaft is an important part of truck engine parts, and it is also a fast moving parts.
曲轴是一个重要的组成部分卡车发动机部件，而这也是一个快速移动的零件。

10、The second photo shows the crankshaft center bearing holder installed in the block.
第二图为曲轴中心轴承持有人安装在该区块。

11、Remove front crankshaft belt pulley.
拆卸前曲轴皮带轮。

12、The crankshaft serves to change the reciprocating power into rotary power.
曲轴的作用是把往返力变为旋转动力。

13、The crankshaft therefore must be adequately strong and wear-resistant.
曲轴因此必须要足够结实与耐磨。

14、In order to start them, the engine crankshaft must be turned over.
为了启动发动机，曲轴必须先运转起来。

15、A study of CAD System for Crankshaft Foundry Process
曲轴铸造工艺计算机辅助设计系统的研究

16、It is interlocked with the crankshaft via the chain drive.
它通过链条驱动机构与曲轴互锁在一起。

17、Position drive plate on the crankshaft's dowel pin and press on to the crankshaft flange.
将传动盘安放在曲轴的定位销上，然后压到曲轴法兰上。

18、Check the deflection of the crankshaft both before and after repair.
在修理前和修理后都要检查曲轴的变形情况。

19、As the crankshaft rotates, the crankpin swings in a circle around the shaft.
随著曲轴的转动，曲柄销绕主轴作圆周摆动。

20、The flywheel mounts to the engine's crankshaft and transmits engine torque to the clutch assembly.
飞轮安装在发动机曲轴上，它将发动机的扭矩传递给离合器总成。

21、Install new front crankshaft oil seal.
安装新的前曲轴油封。

22、The article introduced a grinding method and principle of the journal of crankshaft connecting rod.
本文简述了一种正在兴起的曲轴连杆轴颈的磨削方法和原理。

23、It has developed the parametric residual deforming FEA in crankshaft rolling process.
二次开发了参数化曲轴滚压加工残余变形的有限元分析。

24、In that way, the forces acting on the crankshaft are balanced and vibration is reduced.
以这种方式，在曲轴上的力将会达到平衡而且震动也会减少。

25、The nationalization of engine crankshaft blank for Jetta, Bora and Golf car was realized.
实现了捷达、宝来和高尔夫轿车发动机曲轴毛坯的国产化。

26、Research on Motion Model of Constant h_(eq)Non_circular Crankshaft Grinding
曲轴非圆的恒当量磨削厚度磨削运动模型研究

27、The nationalization of engine crankshaft blank for jetta bora and golf car was realized.
实现了捷达、来和高尔夫轿车发动机曲轴毛坯的国产化。

28、Torsional vibration of engine crankshaft is an important dynamic problem.
扭转振动是发动机一个重要的动力问题。

29、The wings are driven by a crankshaft that is connected to a gearbox.
机翼由连接着齿轮箱的机轴驱动。

30、High efficiency crankshaft FAE system based on VC++ and ANSYS interface
基于VC++和ANSYS接口的高效率曲轴有限元分析系统

crankshaft翻译