brazing造句

1、MICROSTRUCTURE AND PERFORMANCE OF Ni-Hf BRAZING FILLER ALLOY
Ni-Hf合金钎焊料的显微组织和钎接作用

2、STUDY ON BRAZING PROCESS AND JOINT STRENGTH OF ALUMINAC CERAMICS
氧化铝陶瓷钎焊工艺与接头强度的研究

3、Ti-based amorphous brazing material is a new brazing material with great application prospect.
钛基非晶态钎焊料是一种较有应用前景的新型钎焊材料。

4、The results obtained have instructive function for brazing technology of gyro housing.
研究结果对陀螺仪壳体的钎焊工艺具有指导意义。

5、The forming mechanism is different in the fusion layer, brazing layer and heat agglomerating layer.
渗铬层内不同区域的形成机理有较大差别。

6、Apply brazing wire or rod at point where tube enters valve socket.
将铜焊线或铜焊条按在插入阀门承插口的管道线上。

7、Mechanisms of Cracks Forming in Al_2O_3/Kovar Brazing Joint
Al_2O_3/Kovar钎焊接头裂纹冶金因素分析

8、The superior brazing joint can be obtained by the vacuum brazing.
真空钎焊可得到高质量的钎焊接头。

9、High power transverse flow CO2 laser was used to scan the brazing alloy and diamond grits.
采用高功率横流CO2激光扫描钎料合金与金刚石颗粒。

10、When joint is filled, a continuous run of solder or brazing alloy will be visible.
在安装连接部件时，可以看到焊料和钎焊合金继续流动。

11、The Procedure for CMT Method MIG Brazing of Aluminium and Galvanized Steel
铝和镀锌钢CMT法MIG钎焊工艺研究

12、Dynamic analysis of the brazing process is made.
本文对钎焊过程进行了动态分析。

13、Ti-Ag-Cu Active Metal Brazing of AlN Ceramics
AlN陶瓷的Ti-Ag-Cu活性封接工艺

14、Silver Brazing Method: Assemble parts to be brazed.
银钎焊的方法：对需要进行钎焊的部件进行组装。

15、The strength of a safety screen is greatly increased by brazing each wire crossing.
在金属丝的每一个交叉处进行铜焊，可大大增加防护网的强度。

16、The formation mechanism of wide clearance brazing is discussed.
同时探讨了大间隙钎料的形成机理。

17、Brazing of copper, copper alloys, silver and molybdenum etc.
钎焊铜及铜合金、银、钼等金属。

18、Active Metal Brazing of Hot-Pressed Si_3N_4 Ceramics
热压氮化硅陶瓷的活性金属钎焊

19、This paper analyses the cause of strength descent of brazing weld, and proposes improving measures.
本文分析了钎焊焊缝强度下降的原因，并提出改进措施。

20、A solder paste used for brazing was developed and its technical performance was investigated.
研制了铝硬钎焊用钎料膏，对其工艺性能进行了研究。

21、But there are many problems in the process of making brazing diamond film tools.
但在金刚石厚膜钎焊刀具的加工过程中，还存在许多问题。

22、The temperature of the joint should be hot enough to melt the brazing alloy.
连接部位的温度应该高到能够融化铜焊合金。

23、DYNAMIC ANALYSIS OF SPECIFIC HEAT DENSITY OF Ar ARC BRAZING ZONE
氩孤钎焊加热区比热流分布的动态分析

brazing翻译