extrusion造句

1、Upper Bound Analysis of Extrusion of a Spline Shaft
花键轴挤压的上限分析

2、It can be made by blowing, extrusion casting, solution casting, or by calendaring.
可通过吹膜、挤压铸造、溶液铸造或轧光工艺制造。

3、Objective: To improve ct diagnostic value of extrusion disc in intervertebral foramen.
目的：提高对椎间孔内腰椎间盘突出的CT诊断及临床意义的认识。

4、A flexible, toughened, low moisture absorption polyamide 612 resin for extrusion applications.
一个灵活的，增韧，尼龙612树脂挤出应用低水分的吸收。

5、Effect of chlorinated polyethylene on rigid polyvinyl chloride extrusion is studied.
研究了氯化聚乙烯(CPE)对硬质聚氯乙烯挤出性能的影响。

6、At the same time the Brabender extrusion behaviour was also studied.
同时对共混体的挤出加工性能进行了研究。

7、THE HIGH SPEED EXTRUSION TECHNOLOGY OF PE CABLE MATERIAL
聚乙烯电缆料的高速挤出技术

8、Analysis of Cold Extrusion Die by Finite Elements
冷挤压模的有限元分析

9、Applicable to screw extrusion particles, rock particles, high-speed mixed granulation particles.
适用于螺杆挤压颗粒、摇摆颗粒、高速混合制粒颗粒。

10、Fibrous tissue formed by extrusion is the main reason of the anisotropy in L and LT directions.
挤压形成的纤维组织是引起挤压带板L向及LT向各向异性的主要原因。

11、Influence of extrusion process on grain size of AK_(4-1ч) rod
挤压工艺对AK_(4-1ч)合金棒材晶粒大小的影响

12、E: Extrusion nozzle.
E：挤出嘴(见样品)。

13、Rugged aluminum extrusion supports the linear rail system through the entire stroke length.
坚固的铝挤压支持通过整个行程长度的直线铁路系统。

14、Design of Forward Extrusion Trimming Die for Drawing-Type Bush
抽动式衬套正挤切边模设计

15、Why this three screw extrusion machine has such a powerful plasticizing dispersion function?
为什么这种三螺杆挤出机具有如此强大的塑化分散功能呢？

16、Extrusion Process of Multi-oriffice Plastic Pipes and Its Die Head
多孔塑料管材挤出工艺和机头模具

17、We also produce the following projects: Injection Product, Extrusion Product, and Die Cast Product.
我们还生产以下项目：注塑产品、塑产品、铝产品。

18、In this paper, the coining of turbine static-blade formed by lateral extrusion is researched.
本文对径向挤压成形的汽轮机静叶片进行了精压工艺研究。

19、Study on the Stress Distribution of Cold Extrusion Die under Inner Pressure
冷挤压模受内压作用应力分布规律的研究

20、The main cause for arcing is the severe extrusion and abrasion on the fixed part of the wires.
而导致这两根导线之间产生电弧的直接原因则是导线在固定卡子部位出现了严重挤压和磨损。

21、Study of the high speed extrusion property of PE for telephone cable
聚乙烯绝缘市话电缆高速绝缘挤出性能研究

22、The extrusion and injection conditions of the flame-retardant POM were the same as common POM.
注塑时宜采用螺杆式注塑机，挤出和注射成型的工艺条件与普通POM相同。

23、There are lots of advantages by cold extrusion for straight knurl nut in a single process.
直纹滚花螺母采用冷挤压一次成形新工艺，成效显著。

24、The key is how to heat up the cold feed extruder equably and improve extrusion efficiency.
但关键问题是如何使冷喂料挤出均匀加热，如何保证挤出质量，提高挤出效率。

25、Carriage: Guided and Supported, body extrusion geometry, supports carriage motion.
运输：引导和支持，身体挤出几何，支持运输的议案。

26、Optimization of die bearing for aluminum profile extrusion die
铝型材挤压模工作带优化

27、Study of the Mechanism of Wall Slip in an Extrusion Dic of Polymer Melts
挤出口模内壁面滑移机理研究

28、Technology of Liquild Extrusion for Aluminium Alloy oil Pump Body of Car
轿车铝合金油泵壳体液态挤压工艺

29、Application of 65Cr4W3Mo2VNb Steel in Heat Extrusion Die
65Cr4W3Mo2VNb钢在热挤压模具上的应用

30、Life and failure analysis on hot extrusion die for bearing rings
套圈热挤压模具失效分析

extrusion翻译