shrinkage造句

1、For cancer drugs, tumor shrinkage is considered a predictor of increased survival.
对癌症药物来讲，能够使肿瘤收缩被认为是增加生存机会的预言者。

2、The reality is that balance sheet shrinkage is best deferred until markets improve.
实际上，最好的选择是等市场好转之后再缩小资产负债表。

3、Durable, white, water - resistant, low shrinkage resin for stereo lithography for SLA system.
应用于立体光刻技术的耐久性，白色，防水和低收缩的树脂。

4、There has been much shrinkage of the clothes in the wash.
这些衣服洗后已缩了很多。

5、It is better to allow for shrinkage when buying cotton clothes.
买棉衣时最好要考虑到它们的缩水率。

6、Solve the problem of internal shrinkage of magnesium iron foundry.
解决球铁铸造内部缩孔问题。

7、Centerline shrinkage is the main defect that affects the inner quality of continuous casting slab.
连铸坯内部中心缩松、缩孔是影响铸坯内部质量的主要缺陷之一。

8、Inspect interior walls for shrinkage damage.
检查一下内墙，看是否有干缩损坏。

9、Shrinkage strains are mdependent of the stress conditions in the concrete.
混凝土的收缩是一种自发的变形，并不依靠作用在混凝土上的外力。

10、Shrinkage Prediction of Locomotive Long Hub Core Casting
机车长毂轮芯铸件缩孔缩松预测

11、Surface of the adaptor case should no scratch,. no shrinkage mark, flash and mechnical damage.
外壳表面应平整无划痕、缩水纹、毛刺及其它机械损伤。

12、Some patients have also had shrinkage of their tumors (partial response).
一些患者的肿瘤已有缩小（部分反应）。

13、It is indicated the said crack is due to too small shrinkage ratio of the compacting die.
指出，拉丝模内孔之所以产生裂纹，是由于压模收缩比太小的原因。

14、Analysis of Shrinkage Mark on Ribs of GMT Parts
GMT制品加强筋表面缩痕成因分析

15、The impacts of transverse and longitudinal shrinkage of welding seam on underframe positioning.
以及焊缝横向、纵向收缩对底架定位的影响。

16、When making clothes, you must allow for the shrinkage of these materials.
你做衣服时，必须考虑到这些布料的缩水性。

17、Analysis on Shrinkage Cracks of the Long Concrete Wall
混凝土长墙收缩裂缝分析

18、The feasibility for producing high shrinkage acrylic fiber polymer by existing process was studied.
分析探讨了采用现有工艺生产高收缩腈纶聚合物的可行性；

19、They also undergo a high shrinkage or reduction in volume during solidification.
它们在固化过程中收缩较大或体积减少较多。

20、the rate of shrinkage in size or number.
在尺寸或数目上收缩的比率。

21、We can control the shrinkage according to your request.
我们缩水率可以做到你要求的。

22、Study on Eddy Current Method for Concrete Early Age Shrinkage Measurement
混凝土早龄期收缩测试电涡流法的研究

23、The volume shrinkage of the sample was lowed from 7% to 0.8%, which apparently smoothen the film.
特别是树脂的固化体积收缩率显著降低，从7％下降到0.8％，明显改善了涂膜的平整性。

24、Shrinkage cavity predication is main purpose of casting simulation.
预测缩孔缺陷产生是铸件凝固模拟的主要目的。

25、The shrinkage of the base decreases by the proper dosage water reducing agent.
适宜用量的减水剂降低了基层材料的收缩量。

26、STUDY ON SHRINKAGE OF CDP-FDY FIBER AT DIFFERENT DRAWN TEMPERATURE
拉伸温度对CDP-FDY纤维收缩性能的影响

27、The shrinkage movement can be transformed temperate difference at equivalence relation.
收缩变形可用温度应力的概念换算为当量温差。

28、Study on hot water shrinkage rate of PTT and PBT filaments
PTT与PBT长丝的热水收缩性能比较

29、The main deformity of the center housing cast in the automobile turbocharger is shrinkage cavity.
在汽车涡轮增压器中心架铸件生产中主要产生缩孔缺陷。

30、High shrinkage PAN bulk top are produced by using the process of "drawing to break".
论述了用拉断法直接制条生产高缩率腈纶膨体纱毛条的生产工艺。

shrinkage翻译