dowel造句

1、Drill bits for dowel and bolts and cord.
钻头的销子和螺栓和脊髓。

2、Fit a dowel pin here to keep the adjacent parts aligned.
在这里装一个定位销，是相邻的两个部件对准。

3、Splitting forces are higher and dowel action is greater with the use of large diameter bars.
剪切力较高，销栓作用比大直径钢筋更有用。

4、Start by laying out the dowel locations every 6 in. to 8 in. along the joint.
先在要对接的边上每隔6 ~ 8英寸画一个圆榫定位标记。

5、Dowel pins need to be short to allow easier dis-assembly and assembly of the mould during use.
合销必须足够短，以便在使用中能更易于模具的拆卸和安装。

6、I go to a place where a dowel splits off.
我爬到钟顶端定位梢分开的地方。

7、The carpenter gauged the dowel with calipers.
那木匠用卡钳估量暗榫。

8、Not all parts will receive dedicated dowel pin holes.
并非所有的部分将得到专门的柱销孔。

9、The two dowel pins align the cap and base of the housing.
用两个定位销将座罩和轴承座基础对准。

10、Tooling Plate: Standard dowel locating holes and accurately milled locating slots.
模具板：标准定位桩孔，定位准确磨槽。

11、Where possible screw and dowel hole clearance will be provided in the manifold.
只要可能，在分流式系统上应提供螺丝及合销孔。

12、Tooling Plate: Easy access mounting, accurate dowel location, accepts shocks.
模具板：轻松访问安装，定位准确的木钉，接受冲击。

13、Position drive plate on the crankshaft's dowel pin and press on to the crankshaft flange.
将传动盘安放在曲轴的定位销上，然后压到曲轴法兰上。

14、One four foot length of wooden dowel that fits inside the pipe.
一个四英尺长的木制桩相适应的管内。

15、Its unable to repair dowel crown because of its shorter root of tooth.
残根太短，一般无法利用桩冠修复。

16、Objective To restore serious dental defects using reinforced fiber composite resin dowel cores.
目的利用加强纤维复合树脂桩核修复牙体严重缺损。

17、Tooling Plate:Universal mounting pattern with standard dowel locating holes.
模具板：通用模式与标准安装定位桩孔。

18、Tooling Plate: Universal mounting pattern with standard dowel locating holes.
模具板：通用模式与标准安装定位桩孔。

dowel翻译